ANTICOR PLAST 701-40 corrosion protection plastic tape is adequate for A30 class according to DIN-EN 30672 and PN-EN 12068.

Backing
• Synthetic cloth.

Adhesive:
• Oil derivative plastic mass with corrosion inhibitors.

TECHNICAL DATA:
• Colour: Sahara
• Total thickness: ≥1,2mm.
• Operating temperature: -34^oC do +30^oC.
• Synthetic cloth thickness: up to 0,4mm.

APPLICATION
• As corrosion protection of T-joints, curve sections of pipe, flanges and muff joints, pipe fittings and valves.
• As a protection of underground installations placed in wells.

FEATURES & ADVANTAGES
• Good moisture resistance.
• Good electric strength.
• Compatible with bituminous and PE isolations.
• Easy to apply.

USAGE
• Clean the surface thoroughly from rust, grease and moisture.
• Clean and tarnish present isolation ends with abrasive paper (about 10 cm length on each end). Bevel edges.
• Wrap the tape spirally around the protected surface with 50% overlap and lightly tension
• Even the surface of applied coating up manually or using trowel. Press to adjust the tape to any irregularity
of protected element.